Frequently Asked Questions
Choose a category
How to apply WonDeck cards?
WonDeck comes with a 3M self-adhesive label and is easy to apply, and the glue is activated by more powerful pressure on the substrate. Just peel the protective film of the glue and glue the board. Make sure that the area is glued clean.
What kind of surfaces can it be applied to?
WonDeck can be applied to a flat or slightly curved surface, and is applied directly to the anti-slip surface of your boat and moves to a smooth part of 1 cm to achieve an ideal grip to the surface.
Can WonDeck stack without spaces?
WonDeck can be stacked piece by piece, but our recommendation is to leave a gap of 1.5 cm between parts because, like any material, WonDeck shrinks and expands depending on temperature.
What conditions are required for the assembly of WonDeck?
The WonDeck application is operated at a temperature higher than 15°C, in moisture-free conditions.
How do I prepare the surface for the WonDecka app?
Does WonDeck heat up under the bright sun?
Unlike other products, WonDeck heats up less thanks to its closed-cell structure. Darker colors are of course more susceptible to warming but never to the extent that it would be uncomfortable for a person who stands barefoot on the lining.
How to remove WonDeck?
Removing WonDeck is simple: a plastic scraper is needed, with the help of which one of the corners of the material is raised, after which it is pulled from the substrate with its hands. It is recommended that at least 2 people work to remove the material. If the material is very clingy to the substrate, we recommend pour acetone, after which the scraper is used again. Once the material is removed, adhesives will remain on the base, which need to be soaked in a glue solvent and left for up to 10 minutes and cleaned with a coarser cloth. Finally, clean the substrate with acetone and the surface will be perfectly clean.
How to clean WonDeck boards?
WonDeck is easy to clean with washing shampoo, warm water and a brush. If these are stubborn stains, it is best to clean with acetone, which must be immediately rinsed with water.
How long will WonDeck last?
WonDeck will withstand 5-7 years in the most difficult conditions (sun, sea, humidity, etc.), of course with proper preparation of the substrate and application.
What tools are needed to cut a WonDeck board?
Sharp knife and ruler (Please be careful when using a knife)
How to apply WonDeck boards?
WonDeck comes with a 3M self-adhesive label and is easy to apply, and the glue is activated by more powerful pressure on the substrate. Just peel the protective film of the glue and glue the board. Make sure that the area is glued clean.
What kind of surfaces can it be applied to?
Does WonDeck heat up under the bright sun?
Unlike other products, WonDeck heats up less thanks to its closed-cell structure. Darker colors are of course more susceptible to warming but never to the extent that it would be uncomfortable for a person who stands barefoot on the lining.
How to remove WonDeck?
How do I prepare the surface for the WonDecka app?
How to clean WonDeck boards?
How much is the guarantee?
What is Wondeck?
How to order a personalized WonDeck?
How much of the largest piece of WonDeck can I order?
How can I get samples?
Is it possible to personalize WonDeck?
How long does WonDeck take?
Order now
You want your boat to have a superb and classic look, provide a pleasant feeling to your legs, does not lose its original color and it is weatherproof?
Order your WonDeck now and join our satisfied customers!